Product Range

ClassicBond EPDM roof systems offer economical, easy installation and require no special tools or installation equipment, perfect for refurbishments and new build projects:

  • Choice of 1.2mm thick or premium 1.5mm thick membrane
  • Maintenance free waterproof membrane
  • Does not crack, split or rot
  • UV stable
  • Does not support moss or algae growth
  • Environmentally friendly
  • Safe to install – the system is laid with cold applied adhesives
  • One piece sheet equals no joints… no leaks

ClassicBond EPDM Membranes

Professional grade EPDM membranes are all BBA approved and available in 1.2mm and premium 1.5mm thicknesses.

These roofing membranes may be used for new singleply roof construction and re-roofing applications. Available in widths of up to 15m (50’) and lengths of up to 30.5m (100′).

ClassicBond Bonding Adhesive

A high strength, solvent based contact adhesive, specifically designed and manufactured for EPDM flat roofing installations. Perfect for bonding ClassicBond EPDM membrane to horizontal and vertical surfaces. Suitable for a range of surfaces e.g. timber, brickwork, metal, PVC and concrete.

ClassicBond EPDM Primer

Designed for one step cleaning and priming of EPDM membrane and other suitable surfaces prior to the application of ClassicBond Pressure Sensitive (PS) accessories such as 75mm PS Seam Tape, 150mm PS Cover Strip, 225mm Uncured Flashing, PS Pipe Seals and PS Walkway Pads.

152mm Pressure Sensitive Overlayment Strip

ClassicBond 152mm PS Overlayment Strip is used for butt jointing of membrane, seaming in metal edging, drip edges and fastening plates. This EPDM tape has a semi cured top surface with a Pressure Sensitive underside.

Pressure Sensitive RUSS Strip

In common with most single ply material, non-reinforced EPDM membranes will overtime try and pull back to the centre of the membrane by up to 10%. The base tie-in (RUSS) controls the membrane movement and stops the membrane moving away from the perimeter of the roof and upstand details.

ClassicBond Lap Sealant

The ClassicBond lap sealant mastic cures off to give a cured rubber consistency. Ideal for sealing wall chase details and using as a finishing bead to compression type joints. Also used to protect the edges of 228mm tape if risk of submergence exists.

ClassicBond One & Two Part Pourable Sealer

For sealing around difficult penetrations e.g. soil pipes, balcony rails. The pourable sealer is available in two types and is used with Pipe Box Pockets, Lap Sealant and ClassicBond EPDM Primer. Simply install the pocket, prime and pour. Choice of 100mm, 150mm & 200mm Box Pockets for all penetration types.

ClassicBond RB Trim Fasteners

ClassicBond trim fasteners are low profile fasteners complete with an EPDM washer to create a watertight seal. Used when mechanically fixing wall trims and Plastisol edge trims.

ClassicBond 68mm Flat Roof Outlet

The pre-formed 68mm outlet is a fast, efficient method of connecting ClassicBond flat roofing systems to existing 68mm internal rainwater pipes on domestic and small commercial roofs. Seamed to the membrane with 228mm PS Tape and EPDM Primer.

ClassicBond 110mm Top Drain

Top Drains give a fast, clean and secure method of joining ClassicBond EPDM membranes to 110mm rainwater pipes for larger flat roofs and commercial properties. The outlet is joined to the EPDM membrane with the integral clamping ring and water cut-off mastic

ClassicBond Deck Adhesive

This high strength, low odour water based acrylic adhesive is specifically designed for use with ClassicBond EPDM roofing membrane to timber deck surfaces.

ClassicBond Spray Bonding Adhesive

A high strength, spray applied contact adhesive, specifically designed, manufactured and tested for EPDM flat roofing installations. Perfect for bonding ClassicBond EPDM membrane to horizontal and vertical surfaces. Suitable for a range of surfaces e.g. timber, brickwork, metal, PVC and concrete.

228mm Pressure Sensitive Elastoform Tape

ClassicBond PS Flashing Tape is easily moulded and highly adaptable to irregular shapes and surfaces. This self-curing tape is used for flashing and waterproofing of roof details such as corners, penetrations, outlets and other flat roof details.

76mm Pressure Sensitive Seam Tape

ClassicBond PS Seam Tape manufactured with a clear poly backing for easier on site application. ClassicBond seam tape offers over 30% greater peel and sheer strength when compared to market rivals. This tape is designed for use with ClassicBond EPDM roofing systems to fuse the EPDM membranes together when installing an overlap seam.

Pressure Sensitive Pipe Seals

ClassicBond EPDM PS Pipe Seals are available in two sizes – small 15-75mm and large 25-150mm in diameter. ClassicBond pipe seals are cured, pre-moulded EPDM flashings with pre-applied Seam Tape to the base and a stainless steel clamping ring.

ClassicBond Water Cut-Off Mastic

For use in a compression termination, this one part mastic is used in a variety of situations where a compression termination of the ClassicBond EPDM membrane is required.

ClassicBond Plastisol Steel Edge Trim & Termination Bars

Available as 100mm wall flashing and 75-175mm deep perimeter trim. Wall trims offer an economical alternative to lead and are not susceptible to theft. Featuring a 100mm face with 25mm return into the wall, fixed in to the wall with RB fasteners

ClassicBond Roof Outlets

The range of ClassicBond outlets provide the installer with a fast, effective method of detailing to flat roof outlets.

ClassicBond Horizontal Roof Outlet

The horizontal roof outlet is designed as an outlet through parapet walls and pitched roofs as well as the potential to be used as a vertical drain in box gutters. Seamed to the membrane with 228mm PS Tape and EPDM Primer.